Start a conversation

CipherLab 9700 Warm/Cold Boot

To Warm Boot the CipherLab 9700:

  1. Press and hold the Power button until the menu appears.
  2. Select the Warm Boot Option.
  3. The device reboots.

Clean Booting the CipherLab 9700:

  1. Remove battery.
  2. Push the small reset button located to the bottom right of the connectors a couple times.
  3. Insert the battery .
  4. Push the power button until device turns on.
  5. As soon as your screen illuminates push (blue button, orange arrow, 3) at the same time.
  6. If done correctly you’ll see “Clean Boot” at the top of the screen below the firmware versions.





Choose files or drag and drop files
Was this article helpful?
  1. Corey Hagewood (Migrated deleted Agent)

  2. Posted
  3. Updated


  1. Scott

    It says to press the small reset button "a couple times". It is actually 15 times. There is actually a small picture beside the reset button with circling arrows and a 15 printed in the middle. - Sept. 3, 2019

  2. Cédric Vander Stukken

    Doens't work.. 21/09/2017

  3. Joseph Kraebel

    Staff –

    Article has been updated with correct Clean Boot instructions.