Get TracerPlus on Google Play and scan barcodes with your android devices. Download a free trial of TracerPlus and create your own mobile barcode and RFID applications
Changing the Imager setting on Motorola devices to only read the barcode it is focused on
Posted by Joseph Kraebel on 08 December 2010 05:18 PM
This is useful for barcodes that are close together. Normally the imager will pick up either barcode as they are both focused in the surrounding aiming box. This setting will change the focus of the imager so that it only picks up the barcode that the center crosshair is focused on.

  1. Navigate to the devices Ctl Panel. If your device does not have Ctl panel you will need to download it from and copy it to the device.
  2. Tap on Persist to change the value to Yes.
  3. Tap Scanner Settings.
  4. Tap Reader Parameters.
  5. Tap Picklist Mode so that it shows Enable.
  6. Hit OK, OK and then Exit.
(119 vote(s))
Not helpful

Comments (0)
Post a new comment
Full Name:
CAPTCHA Verification 
Please enter the text you see in the image into the textbox below (we use this to prevent automated submissions).