Get TracerPlus on Google Play and scan barcodes with your android devices. Download a free trial of TracerPlus and create your own mobile barcode and RFID applications
Knowledgebase
Warm and cold boot instructions for Windows mobile/CE Handheld devices (Symbol/Motorola)
Posted by Joseph Kraebel on 11 October 2012 02:20 PM

MC9190-G CE 6.0

  • Warm Boot
    1. Hold down the Power button for approximately five seconds. As soon as the MC9190-G starts to perform a warm boot release the Power button.
  • Cold Boot - A cold boot restarts the MC9190-G and erases all user stored records and entries that are not saved in flash memory (Application and Platform folders) or a memory card. Never perform a cold boot unless a warm boot does not solve the problem.
    1. Press the primary battery release on the MC9190-G to partially eject the battery from the MC9190-G.
    2. While the battery is partially released, simultaneously press and release the handle trigger and the Powerbutton.
    3. Push the battery to fully re-insert it in the MC9190-G. One audible click can be heard as the battery is fullyinserted.
    4. The MC9190-G initializes.
    5. Calibrate the screen.

MC9190-G Windows Mobile 6.5

  • Warm Boot
    1. Hold down the Power button for approximately five seconds. As soon as the MC9190-G starts to perform a warm boot release the Power button.
  • Cold Boot - A cold boot restarts the MC9190-G. The operating system and all applications are restarted. File storage is preserved.
    1. Press the red Power button. The PowerKey Action window appears.
    2. Tap Safe Battery Swap. The Indicator LED Bar lights red.
    3. Press the primary battery release on the MC9190-G to partially eject the battery from the MC9190-G.
    4. While the battery is partially released, simultaneously press and release the trigger and the Power button.
    5. Push the battery to fully re-insert it in the MC9190-G. One audible click can be heard as the battery is fullyinserted.
    6. The MC9190-G initializes.

 

PPT8800

  • Warm Boot
    1. Press and hold Enter, Function and Left Scan Keys at the same time and release.
  • Cold Boot
    1. Remove battery cover.
    2. Press and hold Function Button.
    3. Use tip of stylus to press and release reset button in battery compartment.
    4. Release funciotn button.
    5. Replace battery cover.

MC50

  • Warm Boot
    1. Use stylus to Press reset button on back of unit.
  • Cold Boot
    1. Press and hold down Power, Right Scan key.
    2. While holding these use stylus to press the reset button on back of unit.

MC35

  • Warm Boot
    1. Press reset button on side of device.
  • Cold Boot
    1. Press and hold Power and Push to Talk buttons.
    2. While holding press the reset button on side of unit.
    3. Press volume up to clear all data.
    4. Release the Power and Push to Talk buttons.
    5. Press top key of the volume button to confirm the hard reset.

MC70

  • Warm Boot
    1. Press and hold power button until it reboots.
  • Cold Boot
    1. Press and hold 1,9 and power.
  • Clean Boot (Restores to factory defaults)
    1. Copy clean boot files to temp folder of device and execute while in the cradle.

 

MC3000, MC3090

  • Warm Boot
    1. Press and hold 7,9 and power or Start-->Programs-->Warm Boot
  • Cold Boot
    1. Press and hold 1,9 and power.

MC909X

  • Warm Boot
    1. Press and hold power until it reboots.
  • Cold Boot
    1. Partially eject battery.
    2. Press power and left scan key at same time and release.
    3. push battery back in.
  • Clean Boot (Restore to factory defaults)
    1. Copy necassary clean boot files to Temp folder on device and execute while in cradle
    2. Copy clean boot files to sd card, execute a cold boot, hold power button in during boot. 
(30 vote(s))
Helpful
Not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments:
CAPTCHA Verification 
 
Please enter the text you see in the image into the textbox below (we use this to prevent automated submissions).