Do More With Your Mobile Workforce
Download TracerPlus

Get TracerPlus on google play and scan barcodes with your Android devices. Download a trial and start developing mobile barcode and RFID apps.
RSS Feed
Knowledgebase
   


To Warm Boot the Motorola MC3200: * Press and hold the Power Button for 5 seconds. * Release the Power Button when the Motorola splash screen appears. To Cold Boot the Motorola MC3200: * Press and hold the Power Button, 1 key, and 9 key at ...
When registering TracerPlus and TracerPlus Connect, you have to be aware of 3 main points. A lot of people miss the 3rd one and it will still be running in trial mode 1. TracerPlus *on the device* must be registered. 2. TracerPlus Connect *on the PC* mus...
In TracerPlus Version 8.0, we now include the installer for ActiveSync / Windows Mobile Device Center if your PC does not have it installed. Older versions of TracerPlus may receive the error - Error 1904 - Rapi.dll failed to register - during the i...
Some people have run into issues while trying to load the Android Emulator to their PCs. If you are unable to load the emulator and it is requiring a Java update please try the following link: http://java.com/en/download/manual.jsp [1] Select Win...
Setting up barcode scanning and SMARTFORM can be a powerful addition to any TRACERPLUS application. Barcode scanning settings in TRACERPLUS differ greatly depending on the mobile device you are using. TRACERPLUS has native support for all MOTOROLA and ...
CAB installation files can be used to customize aspects of your TRACERPLUS installation. With a CAB file it is possible to install TRACERPLUS, deploy a selected PROJECT, and REGISTER that device all by running one CAB installer. It is possible to creat...
Some people have asked this question before and it is a feature request on the roadmap for TracerPlus in the future. The current releases of TracerPlus do not have the ability to create different sessions at different locations, then combine the two into ...
The form size that is created in TRACERPLUS DESKTOP can be changed to fit any type of device. The is done via the FORM PROPERTIES tool. This tool is found on the FORM DESIGNER Tool Bar (the icon with the blue wrench). The FORM PROPERTIES tool contains ...
Within TracerPlus you are able to add additional fonts of your choice. For those who would like to use languages or fonts other than what is currently listed you will need to add the font to the device itself and change the defined font in TracerPlus D...
To Warm Boot the CipherLab 9700 (CE 6): * Press and hold the Power button until the menu appears. * Select the Warm Boot Option. * The device reboots. To Cold Boot the CipherLab 9700 (CE 6): * Remove the battery from the device. * Place...
If you don't want to continually post duplicate tags, try setting the Post type on the Destination to UpdateExistingAppenIfNotFound. You can find this on the Options tab next to the destination selector. Make sure to select an update field after you do th...
Many of our users ask how they can configure a backup TracerPlus Connect server just in case the main server is unavailable for syncing data. To do this, follow the steps outlined below: - In the TracerPlus Desktop project select the 'Project' tab ...
If you are unable to Connect your Janam XM66 to a mobile printer through Bluetooth, try these steps: 1) Access the bluetooth settings on the XM66 via Start-->Settings-->Connections-->Bluetooth. 2) Add the device that was found and entered my pin...
Within TracerPlus connect lies the ability to import and export your project configurations. This can be useful when developing your Sync Profiles and Sync Proceses on one machine but deploying them for use on another machine. This is achieved by simpl...
To Warm Boot the Datalogic Memor: * Press the ESC button and the Power Button at the same time. * Release the keys once the Datalogic Splash Screen appears. To Cold Boot the Datalogic Memor: * Press the ESC Button, Power Button, and the Cen...
To Warm Boot the Datalogic Skorpio: * Press the Scan Button, Yellow Key, and Blue Key at the same time. * Release the keys once the Datalogic Splash Screen appears. To Cold Boot the Datalogic Skorpio: * Press the Scan Button, Yellow Key, Bl...
At this time TracerPlus does not run on all Windows/Android devices. The following devices are among the ones known: *Windows 8 Phone *Droid Razr *Psion Omnii XT15
Exporting a .tce file is incredibly useful when sending your project to another location or in to the Technical Team for Support. In just a few quick steps, you can attach this file to an email. While TracerPlus Connect is open with the current proj...
To Warm Boot the Honeywell Dolphin 6000: * Go to Start-->Power Tools--> Reboot -->Reboot. * This will restart the device. To Cold Boot the Honeywell Dolphin 6000: * Press and hold the Power Button for 3 seconds. * Select OK on the popup t...
To Warm Boot the Honeywell Dolphin 6100: * Using the stylus, press the Reset Button (located to the left of the Power Button). To Cold Boot the Honeywell Dolphin 6100: * Press and hold the Reset Button, then press and release the Power Button...
To Warm Boot the Honeywell Dolphin 6110: * Press and hold the Power Button until a Menu appears. * Select Soft Reset from the menu. To Cold Boot the Honeywell Dolphin 6110: * Press and hold the Power Button until a menu appears. * Select ...
To Warm Boot the Honeywell Dolphin 6500: * Using the stylus, press the Reset Button located to the right of the F2 Key. * The screen will turn white and the LEDs will flash. To Cold Boot the Honeywell Dolphin 6500 (28 Key Version): * Press ...
To Warm Boot the Honeywell Dolphin 9700: * Press and hold the Red Button and the Tab Key for 5 seconds. * The LEDs will flash for 3 seconds then the device will restart. To Cold Boot the Honeywell Dolphin 9700: * Press and hold the Red Butt...
AT&T WAN CONNECTION ON A WINDOWS MOBILE BASED DEVICE Click START->SYSTEM->CONNECTIONS->ADD A NEW MODEM CONNECTION. Select CELLULAR LINE (GPRS) and follow the steps below depending on the network type. * 3G/Edge Name: ATT APN: wap.cingular Proxy:...
To create a Device Registration file for use with TRACERPLUS CONNECT Satellite PCs you will need to do the following: * Register your Primary PC with the supplied registration code by selecting TOOLS -> REGISTRATION. * Add the devices within the ...
To fix the Cannot Find Sync Library Error, follow the steps below: * First, try re-installing TRACERPLUS to the device. Make sure to fully remove TRACERPLUS from the mobile device before re-installing. * To fully remove TRACERPLUS from your devic...
To install a CAB FILE, follow the instructions below: * Start by connecting your device to your PC. * Copy the CAB FILE from your PC to the device. This can be done through Windows Explorer, click START-->MY COMPUTER then select your device from ...
When using a text file as a reference for your project, this file will need to be copied to your device. This is used when TracerPlus Connect is not being used. When your device is connected to the PC you will be able to navigate to the correct fold...
To Warm Boot the Janam XG100: * Press both the ESC key and the Trigger at the the same time. * Release the keys once the Janam Splash Screen appears. To Cold Boot the Janam XG100: * Press the CTRL key, BKSP key, and the Trigger at the same ...
To Warm Boot the Janam XM60+: * Press both the Blue key and the Power Button at the same time. * Release the keys once the Janam Splash Screen appears. To Cold Boot the Janam XM60+: * Press and hold the Power Button and the Yellow key at th...
To Warm Boot the Janam XM66: * Press both the Blue key and the Power Button at the same time. * Release the keys once the Janam Splash Screen appears. To Cold Boot the Janam XM66: * Press and hold the Power Button and the Yellow key at the ...
To Warm Boot the Motorola ES400: * Press and hold the Power Button until a Menu appears. * Select the Power Off option. * Press the Power Button to reboot the device. To Cold Boot the Motorola ES400: * Press and hold the Power Button, 1 k...
To Warm Boot the Motorola ET1 Tablet: * Press and hold the Power Button until a Menu appears. * Select the Reset option from the Menu. * This option will power down the device and start a reboot. To Cold Boot the Motorola ET1 Tablet: * Pr...
To Warm Boot the Motorola MC2100: * Press and hold the Power Button for 5 seconds. * Release the Power Button. To Cold Boot the Motorola MC2100: * Press the Power Button to bring up the Menu. * Select the Safe Battery Swap option. * Wai...
To Warm Boot the Motorola MC3100: * Press and hold the Power Button for 5 seconds. * Release the Power Button. To Cold Boot the Motorola MC3100: * Press and hold the Power Button, 1 key, and 9 key at the same time. * Release the Buttons o...
To Warm Boot the Motorola MC45: * Press and hold the Power Button until a Menu appears. * Select the Warm Boot option. To Cold Boot the Motorola MC45: * Press and hold the Power Button, 1 key, and 9 key at the same time. * Release the But...
To Warm Boot the Motorola MC55A: * Press and hold the Power Button for 5 seconds. * Release the Power Button once the Motorola Splash Screen appears. To Cold Boot the Motorola MC55A: * Press and hold the Power Button, 1 key, and 9 key at th...
To Warm Boot the Motorola MC65: * Press and hold the Power Button until a Menu appears. * Select the Power Off option in the Menu. * Use the Power button to reboot the device. To Cold Boot the Motorola MC65: * Press and hold the Power But...
WINDOWS MOBILE: To Warm Boot the Motorola MC67: * Press and hold the Power Button for 5 seconds. * Release the Power Button once the Motorola Splash Screen appears. To Cold Boot the Motorola MC67: * Press and hold the Power Button, the 1...
To Warm Boot the Motorola MC75A: * Press and hold the Power Button for 5 seconds. * Release the Power Button once the Motorola splash screen appears. To Cold Boot the Motorola MC75A: * Press and hold the Power Button, 1 key, and 9 key at th...
To Warm Boot the Motorola MC9200: * Press and hold the Power Button for 5 seconds. * Release the Power Button once the Motorola splash screen appears. To Cold Boot the Motorola MC9200: * Press and hold the Power Button until a Menu Appears....
To Warm Boot the Motorola MC9500: * Press and hold the Power Button for 5 seconds. * Release the Power Button once the Motorola splash screen appears. To Cold Boot the Motorola MC9500: * Press and hold the Power Button, 1 key, and 9 key at ...
To Warm Boot the Motorola TC55: * Press and hold the Power Button. A Menu will appear. * Select the Reset option. * This option will power down, and reset the device automatically. To Cold Boot the Motorola TC55: * Press the Power, Left S...
To Warm Boot the Motorola TC70: * Press and hold the Power button until the menu appears. * Touch Reset. * The device reboots. To Cold Boot the Motorola TC70: * Simultaneously press the Power, Scan and Volume Up buttons for at least four ...
It is possible to integrate data from TRACERPLUS data into QUICKBOOKS, but the process requires some intermediate steps: * First, setup a sync process to pull the data off the device using TRACERPLUS CONNECT. This data can be stored in a database t...
To run Palm Desktop on a Windows 7 64-bit machine you will need to download Palm Desktop Version 6.2. To find that download please follow this page:http://kb.hpwebos.com/wps/portal/kb/common/article/32859_en.html [1] * Information about Windows ...
Most Android devices are not equipped with a barcode scanner. TracerPlus enables users to utilize the device's built in camera to scan these barcodes. Follow the steps below to enable barcode scanning using the camera: * The field you intend to use...
If you are stuck on this step of the installation process for TracerPlus Desktop or Tracerplus Connect, first exit the installer. Once the installer has been fully closed out, re-start the installation process. When given the option to select what soft...
**NOTE** THIS FEATURE IS ONLY SUPPORTED FOR MOTOROLA DEVICES **NOTE** It is possible to configure Date/time syncing with a Time server in windows CE. This is helpful for devices that reset the time when the battery dies or the device is power cycled...
**TRACERPLUS 9.0 HAS BEEN RELEASED** You can find the released version of TracerPlus 9.0 on our downloads page here: http://www.tracerplus.com/downloads/ [1] **TRACERPLUS 9.0 HAS BEEN RELEASED** Notable changes include: - NEW FEATURES ...
Currently TracerPlus does not support a cradled Android data sync. TracerPlus Connect uses the Windows Mobile Device Center's active sync connection to perform syncs while the Windows Mobile device is cradled. Active sync does not support Android devic...
TracerPlus Connect does not currently support web services natively though this is planned for a future release. Our current supported platforms are ODBC, Excel and text. There are situations in which we are able to create custom interface for our clien...
CHANGE SUMMARY - FEATURES/BUG FIXES -9.0 NEW FEATURES * TP Desktop/TP WM/Android -- CONDITIONAL LOGIC: Allows a huge amount of control over presentation and processing of data based on dynamic variables * TP Desktop/TP WM/Android -- DATE MATH:...
TracerPlus Connect has the ability to export a Connect project so that it can be imported onto a different PC. Sometimes it can be difficult to use this feature depending on how and where that Connect project is saved. To keep the Export/Import process...
Configuring the TRACERPLUS CONNECT SERVICE is a multi-step process. Other than the configuration requirements in TRACERPLUS DESKTOP, and TRACERPLUS CONNECT sometimes additional configuration of PC settings is required. Here is a list of possible confi...
If you are getting a nag dialog on your Device while the device is still registered, make sure to check your Device List in TracerPlus Connect(Found using the Tools-->Registration option in Connect). The device ID of your device should be listed in the...
If you want to use a custom Validation sound in your project, you can use a WAV file to do so. You will need to name the file sound as VALID_ERR.WAV While your device is connected to your PC follow this path: \ -> My Documents -> Trac...
The RFID TAG LOCATOR is a useful tool for finding a specific RFID Tag via a proximity scan around the device. When the button is clicked, a pop up window appears with a meter gauge. This meter along with an audio cue is used to determine the proximity ...
What are the differences between Windows Mobile and Windows Embedded CE? This explanation will clear all confusion. http://blogs.msdn.com/b/mikehall/archive/2007/01/17/windows-mobile-and-windows-embedded-ce-what-s-the-difference.aspx [1] Links: ---...
CAB installation files are a useful tool for installing TracerPlus to your mobile device when a normal install from TRACERPLUS DESKTOP is not an option. * The CAB installation files can be used to install TRACERPLUS to a device remotely through the us...
------------------------- Here you are able to find the Zebra RFID Programming Guide for EPC Gen 2 printers: https://www.zebra.com/content/dam/zebra/manuals/en-us/printer/rfid-pm-en.pdf [1] Links: ------ [1] https://www.zebra.com/content/dam/zebra/...
Most Popular 
 
Recent Articles 
 
Help Desk Software by Kayako Fusion