Get TracerPlus on Google Play and scan barcodes with your android devices. Download a free trial of TracerPlus and create your own mobile barcode and RFID applications
RSS Feed
Knowledgebase : Hardware Related Topics > Windows Mobile and CE Devices
CAB installation files can be used to customize aspects of your TRACERPLUS installation. With a CAB file it is possible to install TRACERPLUS, deploy a selected PROJECT, and REGISTER that device all by running one CAB installer. It is possible to creat...
This is useful for barcodes that are close together. Normally the imager will pick up either barcode as they are both focused in the surrounding aiming box. This setting will change the focus of the imager so that it only picks up the barcode that the cen...
Below are a few videos representing the process of configuring the Memor device to connect to a wireless LAN via 802.11: PART 1 [http://tracerplus.com/kb/Downloads/MemorCE_LAN.wmv] - Configuration of a New profile when one is not found in the list. T...
If you are unable to Connect your Janam XM66 to a mobile printer through Bluetooth, try these steps: 1) Access the bluetooth settings on the XM66 via Start-->Settings-->Connections-->Bluetooth. 2) Add the device that was found and entered my pin code....
The video below demonstrates how to connect a Motorola device running Windows Mobile 6.5 to a wireless network over 802.11 a/b/g: Click Here
Download this registry file (DISABLESIP [HTTP://WWW.TRACERPLUS.COM/DOWNLOADS/PUBLIC/DISABLESIP.ZIP]) that can be used to disable the XAMLIM soft keypad on the MC92N0 CE7 devices. Unzip and copy this file to the root of the MC92N0's Application folder an...
The NAVIGATOR.XML file can be modified to add or remove any option you would like to the Home screen of the MT2000. This file is located in the PLATFORM folder of the device and can be modified in Notepad or Textpad. CLICK HERE [http://www.tracerplus.com...
Click on the Barcode icon in the Windows CE system tray. Select Wedge if it is not checked. Click on the Barcode icon again, select Configure, double tap Reader Parameters, double tap Text Formatting, and double tap Postamble. Select TAB from the drop...
This reduces the decode area of the 6100 to pickup the barcode you are aimed on as opposed to the barcodes that appear in the outer decode area. This will behave like a laser scanner. * Start the SCAN WEDGE software from the POWER TOOLS area * Tap t...
Click on the appropriate links below to see a video demonstration of pairing a Mobile Device to a Mobile Printer using Bluetooth technology: Motorola Windows Mobile 6.1 Devices [1] Motorola Windows Mobile 6.5 Classic Devices [2] Motorola Windows M...
AT&T WAN CONNECTION ON A WINDOWS MOBILE BASED DEVICE Click START->SYSTEM->CONNECTIONS->ADD A NEW MODEM CONNECTION. Select CELLULAR LINE (GPRS) and follow the steps below depending on the network type. * 3G/Edge Name: ATT APN: wap.cingular Proxy:...
To enable the GPS receiver on a Motorola MC75 1. Select Start-->Settings. 2. Select System 3. Select External GPS 4. Set GPS Program Port to "NONE" 5. Set GPS Hardware Port to "Com8" 6. Set GPS Hardware Baud rate to "57600" 7. Select OK.
Motorola has a tool called app center that can lock the device down to only the applications you choose. Please see the links below: Windows Mobile: http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=13148&sliceId=&di...
This problem has been identified by Microsoft as a known limitation when using Windows CE 5 with a flash based system. Honeywell provides as a workaround solution a utility named SYNCME to allow having this file synchronization. Please note this utilit...
The Dolphin 6100 does support decoding of the Data Matrix barcode font. Follow the steps below to verify the Scan Wedge software is properly setup to decode Data Matrix Barcodes. These settings also apply to most Honeywell barcode terminals. * Start t...
Install Data Wedge, this can be downloaded from Motorola at http://support.symbol.com Open Advanced Configuration, Profiles, Profile0, Input, Scanner, Reader Parameters, More, More, Inverse 1D Mode and enable it Open Advanced Configuration, Profiles, ...
See the article below on what needs to be done to get the cursor to flow correctly after a scan in TracerPlus using the Intermec CK3: http://community.intermec.com/t5/General-Development-Developer/TAB-Postamble-on-CK3/m-p/1902
This is a hardware related issue that may be resolved by any of the following actions: * Make sure the appropriate syncing software is installed to the PC. (Microsoft ActiveSync 4.5 / Microsoft Windows Mobile Device Center 6.1 Update) * Warm boot th...
Below are instructions for pairing your Zebra (formerly Motorola) RS507 Hands Free Barcode Imager to a Zebra MC55A via Bluetooth. This will then allow you to use the RS507 to scan data into our TracerPlus mobile software running on a Zebra barcode term...
WARM BOOT - This will restart the terminal, all data and applications will be preserved. To perform a warm boot press and Hold the 2 KEY and the SCAN TRIGGER simultaneously for 5 seconds. COLD BOOT - Warning - All applications and data will be lost an...
**NOTE** THIS FEATURE IS ONLY SUPPORTED FOR MOTOROLA DEVICES **NOTE** It is possible to configure Date/time syncing with a Time server in windows CE. This is helpful for devices that reset the time when the battery dies or the device is power cycled. ...
There are some PCs that are finicky to Sync to handhelds, especially Dell computers as they often have issues with their USB ports not functioning or turning off. Try the following: Reference: http://social.technet.microsoft.com/Forums/en/w7itpro...
There are instances where the scanner decodes but does not display the data in a TracerPlus field when using the Intermec CN50. This seems to happen in CN50's with a firmware version of 1.61 and up. See below to resolve this scanning issue: Downloa...
MC9190-G CE 6.0 * WARM BOOT * Hold down the Power button for approximately five seconds. As soon as the MC9190-G starts to perform a warm boot release the Power button. * COLD BOOT - A cold boot restarts the MC9190-G and erases all user stored ...
What are the differences between Windows Mobile and Windows Embedded CE? This explanation will clear all confusion. http://blogs.msdn.com/b/mikehall/archive/2007/01/17/windows-mobile-and-windows-embedded-ce-what-s-the-difference.aspx [http://blogs.msdn....
If your PC is on a domain (typically a work network) the administrators may have the following MS virus alert KB http://support.microsoft.com/kb/962007 [http://support.microsoft.com/kb/962007] which stops WMDC dead and windows mobile devices do not instal...
Click Here for information on downloading and configuring the Microsoft Windows Mobile Emulator.