Get TracerPlus on Google Play and scan barcodes with your android devices. Download a free trial of TracerPlus and create your own mobile barcode and RFID applications
RSS Feed
Knowledgebase : TracerPlus Desktop > Android OS
INTRODUCTION TracerPlus Desktop supports the Android Debug Bridge (ADB) interface to deploy projects to Android devices. This is an alternate method of deployment for devices that might not support the Media Transfer Protocol (MTP) interface or mapped dr...
***PTS does not support the Android SDK /Emulator ***** To install the emulator you need to install the android sdk. You can find it here.. http://developer.android.com/sdk/index.html#download [1] After installation you should be able to start the e...
This is a known error between the communications from the camera to TracerPlus and actually has a relatively easy workaround. All you have to do is lower the resolution of the picture settings in the camera. So if you're taking an 8MP picture, make it 5MP...
If you've been having trouble using TracerPlus with a CipherLabs Android device, or have been considering buying/just bought one, you will want to read this. CipherLabs' android devices have a built in scanner which TracerPlus natively supports. This me...
This is fairly straight forward and entails resizing the form and then selecting Android at the time of Deploying your Desktop project. You can deploy it without resizing the form however it will look small based on the higher resolutions available to ...
Below are the Four methods currently supported for deploying your TracerPlus Desktop projects to Android OS devices. METHOD 1: MTP (MEDIA TRANSFER PROTOCOL) This method supports most Android devices and is the preferred method of deployment. ...
Some Android 6.0 (Marshmellow) devices disable USB connectivity by default. This will block TracerPlus Desktop from successfully deploying a project to the connected device. To resolve this, USB connectivity needs to be turned on follow these steps to ena...
Download the TracerPlus Android .APK file from our website. There are several methods of retrieval available at the following link: http://www.tracerplus.com/tracerplus/android_install.php [http://www.tracerplus.com/tracerplus/android_install.php] You...
OBD2 support is now available in TracerPlus versions 9.1 and above and allows you to capture vehicle diagnostic information into your TracerPlus forms using a Bluetooth OBD2 scan tool. Watch the videos below to see how this is done. OBD2 SETUP IN TRACER...
Using some Android devices deployment from TracerPlus Desktop may fail. Here are some steps to try and resolve the issue: * Disconnect and restart the device. * Make sure the device and its drivers have been correctly installed in Windows. * ...
Most Android devices are not equipped with a barcode scanner. TracerPlus enables users to utilize the device's built in camera to scan these barcodes. Follow the steps below to enable barcode scanning using the camera: * The field you intend to use sh...
By default, using Zebra/Motorola Android barcode terminals send barcode scanned data over to TracerPlus as keyboard data. This prevents you from using some of the powerful features in TracerPlus including Barcode Type Validation and Smartform. You can now...
Currently TracerPlus does not support a cradled Android data sync. TracerPlus Connect uses the Windows Mobile Device Center's active sync connection to perform syncs while the Windows Mobile device is cradled. Active sync does not support Android devic...