Connecting to TracerPlus Wireless Server using a WAN/Cellular connection

In order to connect to wireless server using a WAN/Cellular device you will need to make the following settings to your organizations internet router:

1. 1. Turn on port forwarding for port 4402.

1. 1. Forward this port to the IP Address that Wireless Server is enabled on.

1. 1. Set the Wireless IP Address in the TracerPlus mobile client to the IP Address of the WAN side of your router. (Most cases this is your ISP's assigned address)

You should now be able to connect with TracerPlus Wireless Server using your WAN/Cellular connection.