Changing the Imager setting on Motorola devices to only read the barcode it is focused on

This is useful for barcodes that are close together. Normally the imager will pick up either barcode as they are both focused in the surrounding aiming box. This setting will change the focus of the imager so that it only picks up the barcode that the center crosshair is focused on.

1. 
   
2. Navigate to the devices Ctl Panel. If your device does not have Ctl panel you will need to download it from http://support.symbol.com and copy it to the device.
   
3. Tap on Persist to change the value to Yes.
   
4. Tap Scanner Settings.
   
5. Tap Reader Parameters.
   
6. Tap Picklist Mode so that it shows Enable.
   
7. Hit OK, OK and then Exit.